Újrahasznosítás - anyagcsíkokból- fürdőszoba szőnyeg

Braided Rag Rug

please click here for kits available to make this rag rug

1 honey bun of your choice (featured is "sweet" by urban chiks) and

4 yards of white fabric

cut your 4 yards of white fabric to 1 1/2 inch widths (yup ALL of it)

once it's all cut up get three strips of fabric and sew them stacked on top of each other (i wanted the middle of my rug to be all white)
safety pin your three sewn strips anywhere you can be comfy (you are going to be there for a while! i did mine attached to my runner on my dining room table) this is the start of your braid.
start braiding your white fabric
****EDITED****
****you need to make sure your braiding is SUPER LOOSE. do not make your braids tight at all. if they are tight they will make your rag rug curl up when you try to sew it together.******
once you get close to the end of your braid you are going to fold over the end of your strip and snip with your scissors a slit.

like so, and then you will do the same to the next strip that will be the following strip to lengthen your braid (do this to each of the three strips)


you will take the next strip and place it on top of the braided strip

grab the end of your new strip (the end without the slit) and pull through both slits (from behind)
this will adjoin your strips and you will be able to continue your braid
this is what it should look like, now keep braiding.

once you get close to the end of your braid you are going to do the same as you did before and make a slit at the ends of your braided strips and at the beginning of your next strips this time wanted to add color so i took one strip of the honey bun and two of the white strips i cut out.



it should now look like this. this will be what you do through out the whole process of braiding your rug. one color in the middle and two whites on the outside.

as you continue to braid your braid will get too long so unhook your safety pin and re-pin it closer to your end.

this is how it should look as you continue to braid. make sure your fabric "folds" with the right side out and continue to braid it loosely

once you have completely braided ALL your strips together. you are going to sew you braid "shut" this tail will be tucked at the very end and you wont see it.
now that you have a whole mess of a braid going on...we are off to hand sew it together.
get some sturdy thread (i recommend one you use for upholstery) and a needle and you are going to start off by coiling your start of the long braid (the whites)

start by hand stitching your coil center like so. (start in the very center of your coil first and work your way out)
*****EDITED*****
make sure once you get your center started and going...place your coil on a flat surface. this will ensure that your rug lays flat with each coil.
also make sure you do not overlay the braids at all. they need to be laying flat and to be sewn side by side to each other.

you are going to continue to hand stitch your braids together, do this for the whole rug. what you are sewing is your back, when you are done, the stitches should be fairly hidden from the top. (the other side)

when you get to your end, make sure you tuck and stitch the end of your braid so that the tail is on the bottom of your rug and hidden when you turn it over. (snip the extra part of your tail if you like)
****to make your rug a little sturdier, i recommend adding a felt backing to your rug.
first start off with placing your rug on top of your large piece of felt, (you can buy it at walmart for pretty cheap off the bolt you will need aprox 1 1/2 yards (just in case so you can piece a little if needed)) and cutting out the same size as your finished rug.
next hand sew around your rug on top of the felt.
and then at random places adhere your rug in the middle (and all over) by doing big stitches through your coils.

look what you made! isn't it pretty? and it will look so great ANYWHERE! (make some smaller circles to make bar stool seat covers!)

Vanessánál...

Szép napot ! by Szaszi